|
Level Ride Rear Axle units are designed for vehicles that have
a single rear axle with full leaf-spring suspension.
Front Axle units require the vehicle to have a straight axle with full leaf-spring suspension.
L/R Stabilizer Units are not intended for & will not fit Air-Ride or Coil Spring suspensions.
REAR AXLE KIT POSITIONS AVAILABLE FOR MOST TRUCKS:
Click on thumbnail image to open full size image in a new window.
POS. # 1 MOUNTS BEHIND REAR AXLE & BELOW FRAME.
Instructions in PDF Format
|
|
POS. # 2 MOUNTS ABOVE AXLE & OVER TOP OF FRAME.
REQUIRES A MINIMUM OF 5" WORKING CLEARANCE BETWEEN HIGH POINT OF
FRAME RAIL & BOTTOM OF SERVICE BODY FLOOR, & REQUIRES USE
OF STANDARD, STEEL, LEAF-TYPE AUXILIARY SPRINGS.
SOME TRUCK MODELS MAY REQUIRE ADDITIONAL AXLE BRACKET SPACERS. |
 |
POS. # 3 MOUNTS IN FRONT OF REAR AXLE & BELOW DRIVELINE.
LIMITED APPLICATIONS AVAILABLE.
Instructions in PDF Format
|
 |
FRONT AXLE KIT POSITIONS AVAILABLE FOR MOST TRUCKS:
POS. # 4 MOUNTS BEHIND FRONT AXLE & BELOW FRAME.
Instructions in PDF Format
|
|
POS. # 5 LIMITED APPLICATIONS AVAILABLE.
MOUNTS IN FRONT OF AXLE & BELOW FRAME.
SOME APPLICATIONS REQUIRE 6" - 8 " GLOVE / LAP TYPE FRAME EXTENSIONS.
(NOT PROVIDED WITH STABILIZER KIT.)
Instructions in PDF Format
|
 |
NOTE:
MOST EVERY APPLICATION MAY REQUIRE LONGER SUSPENSION
U-BOLTS, WHICH ARE NOT PROVIDED WITH OUR STABILIZER KITS.
ALL APPLICATIONS REQUIRE FULL LEAF SPRING SUSPENSIONS.
LIMITED SEVERE DUTY / SPECIALTY APPLICATIONS AVAILABLE.
PLEASE CONTACT US FOR AVAILABLE APPLICATIONS.
AS ALWAYS PLEASE FEEL FREE TO CONTACT US FOR ANY ASSISTANCE.
|
